Mobile scissor lift parts is a kind of aerial work machinery equipment. With the increase of market demand, mobile scissor lift parts are more and more widely used in people & #39;s life and work. So, how to operate mobile scissor lift parts safely?
1. Before work, carefully check the scissor lift parts, focusing on checking whether the screw connection is reliable, whether the hydraulic pipeline components are leaking, and whether the wire contacts are loose or damaged.
2. Enne käärtõstuki osade tõstmist pange neli - nurgajalga kinni. Neli jalga tuleks kindlale alusele tugevalt toetada ja töölaud tuleks horisontaalasendisse reguleerida. Lülitage toide sisse, märgutuli peaks põlema. Seejärel käivitage mootor, õlipump töötab, tõstke üks või kaks korda ilma koormamata üles ja alla ja kontrollige enne töö alustamist, et kõik osad töötaksid normaalselt. Kui temperatuur on madalam kui 10 ℃, tuleks õlipumpa töötada 3 - 5 minutit ja õlipumpa saab normaalselt kasutada alles pärast seda, kui on kinnitatud, et see töötab korralikult.
3. After entering the platform, the operator should close the guardrail door, insert the latch, and fasten the safety rope. The center of the load should be located at the center of the work surface.
4. Lifting and lowering: press the & quot;lifting & quot; button to start the motor, the motor rotates, the hydraulic system works, the oil cylinder extends, and the platform lifts; when the lifting is required to work, press the motor & quot;stop & quot; button, the platform stops lifting , You can work, if you do not press the & quot;stop & quot; button, the travel switch works when the platform rises to the calibrated height, the platform stops at the calibrated height. After the work is completed, press the & quot;Descent & quot; button, the solenoid valve is activated, and the oil return of the cylinder is connected, and the platform is lowered by its own weight.
5. Overloading is strictly prohibited during the use of Scissor Lift Parts. Operators on the platform must not move during the lifting and lowering process.
6. When moving or pulling the hydraulic platform, the supporting legs should be retracted and the platform should be lowered to the lowest position. It is strictly forbidden for the operator to move the platform when it is in a high position.
